WESTBROOK WELDING ALLOYS

MIG - TIG - MMA - BRAZING

  • westbrook welding

CORED WIRE ( MORE WIRES AVAILABLE )


Kiswel E71TLF

Designed for welding 490MP a high tensile steel with outstanding mechanical properties.

Typical applications include shipbuilding, offshore structures, bridges and general fabrications.

Wire is a Titania type of flux cored wire for all position welding.

Kiswel K-81TM

Designed for welding 560MP a high tensile steel with outstanding mechanical properties.

Typical applications include shipbuilding, offshore structures, bridges and general fabrications.

Wire is a Titania type of flux cored wire for all position welding with 1.0% Ni compound.

Hi impact values at low temperatures (-40 C )

Kiswel KX-706T

Designed for welding 490MP a high tensile steel with outstanding mechanical properties.

Typical applications KX-706M is designed for welding of 490MPa high tensile steel with only Ar/CO2mixtures . It is generally used for single sided welding.This wire has good toe wetting & low slag.

Wire is a metal type cored wire for all positional welding, high deposition efficiency and very stable

data sheet technical report

Kiswel K-600HT

Designed for welding of metal to metal and underlaying welding of hardfacing.

Typical applications include crane wheels, blower blades, bucket lips, dredge parts etc.

In order to mininmise cracking, obay the preheat and interpass temperature.

data sheet.

E308LT

K-308LT is designed for MIG/MAG welding of low carbon 18% Cr-8%Ni stainless steel and used to join austenitic stainless steel.

Weldability is excellent with low crack susceptibility.

E316LT

K-316LT is designed for MIG/ MAG welding of low carbon 18%Cr-12%Ni-2%Mo stainless steels and this wire  has low carbon content which gives good resistance to most types of corrosion of the weld metal  (AISI 316L, 316Ti)

Wire is a titania type of flux cored wire for all-position welding and the weld metal contains optimum ferrite contents in their austenitic structures, therefore their weldability is excellent with lower crack susceptibility.

E309LT

Dissimilar joint welds of and between high strength, mild steels and low alloyed QT-steels, stainless, ferritic Cr- and Austenitic Cr-Ni steels, manganese steel cladding.