WESTBROOK WELDING ALLOYS

MIG - TIG - MMA - BRAZING

  • westbrook welding

COPPER ALLOYS


AWS A5.7 ER CuSn-A~

TIG/MIG Filler Wire for the repair and reclamation of Pure Aluminium Can be used with Oxy – Acetylene and an appropriate flux as a Brazing allo. Can be used for alloys that are to be Anodised. Soft wire - best used in MIG form with Spool-on-Gun or push-pull setup.

AWS A5.7 ER CuAl-A1

MIG/TIG Filler Wire for the repair and reclamation of Silicon bearing Aluminium Alloys.

AWS A5.7 CuSi-A

MIG/TIG Filler Wire for the repair and reclamation of Magnesium - Manganese bearing Aluminium Alloys (Marine grade). Higher corrosion resistance to Marine Environment than 5356.

AWS A5.7 ER CuNiAl

MIG/TIG Filler Wire for the repair and reclamation of Magnesium bearing Aluminium Alloys. Recommended also for use on Alloys where neither Silicon nor Magnesium predominate and where Anodising is to be used as final finish.

AWS A5.7 ER Cu

MIG/TIG Filler Wire for the repair and reclamation of Magnesium/Manganese bearing Aluminium Alloys (Marine grade). Higher corrosion resistance to Marine Environment than 5356. Minimum Mg content 4.7%.

AWS A5.7 ERCuAl-A2~

MIG/TIG Filler Wire for the repair and reclamation of Aluminium Bronzes of similar composition. Suitable for the repair and reclamation of Bronzes, such as used in Aluminium Die Casting. Overlay of Steel to produce Spark-free surface with low Coefficient Friction.